Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Charles Daly Prussian ID

  1. #1
    Junior Member
    Join Date
    Jan 2016
    Posts
    21

    Charles Daly Prussian ID

    Hello,

    I too need help to identify this 12 ga. Trap gun. The serial number is 26068. Any help is appreciated.

    Regards,

    Johnnie

  2. #2
    Senior Member
    Join Date
    Dec 2011
    Location
    East Alabama
    Posts
    1,642
    Johnnie,
    Others on this Forum are much more knowledgeable than I about these guns. However, as a general rule, to help you they will need photos, including of all the proof and other markings found under the barrel.
    Mike

  3. #3
    Junior Member
    Join Date
    Jan 2016
    Posts
    21

    Thanks

    Quote Originally Posted by mike ford View Post
    Johnnie,
    Others on this Forum are much more knowledgeable than I about these guns. However, as a general rule, to help you they will need photos, including of all the proof and other markings found under the barrel.
    Mike
    Hey Mike,

    Thanks for the heads-up. I will get some pictures today.

    Regards,

    Johnnie

  4. #4
    Junior Member
    Join Date
    Jan 2016
    Posts
    21
    Quote Originally Posted by JYS View Post
    Hey Mike,

    Thanks for the heads-up. I will get some pictures today.

    Regards,

    Johnnie
    As promised;
    action engraving serial number.jpgreceiver stampings.jpgstampings in front of barrel lug.jpgserial number barrel and fore grip.jpgstamping barrel breach.jpg

  5. #5
    Junior Member
    Join Date
    Jan 2016
    Posts
    21
    Last edited by JYS; 01-03-2016 at 06:01 PM. Reason: added picture

  6. #6
    Senior Member
    Join Date
    Dec 2011
    Location
    East Alabama
    Posts
    1,642
    JYS,
    As I said in my earlier post, others here know more about these guns than I, but until they post something, here is a little info. The gun was proofed in Dec 1930( 1230) and has a 2 3/4" 12 ga chamber, whereas if it were made for German rather than US sale, it would have likely been 2 5/8"(shown by the 12-70, if short chambered it wouldn't have the 70). The crown S means it was proofed for shot. The crown U is the view proof, which is a detailed inspection. If one of the marks that I can't make out is a crown W, that means that barrel is choked. The amount of choke is not shown by the mark. It looks very nice to me, by the way.
    Mike

  7. #7
    Junior Member
    Join Date
    Jan 2016
    Posts
    21
    Quote Originally Posted by mike ford View Post
    JYS,
    As I said in my earlier post, others here know more about these guns than I, but until they post something, here is a little info. The gun was proofed in Dec 1930( 1230) and has a 2 3/4" 12 ga chamber, whereas if it were made for German rather than US sale, it would have likely been 2 5/8"(shown by the 12-70, if short chambered it wouldn't have the 70). The crown S means it was proofed for shot. The crown U is the view proof, which is a detailed inspection. If one of the marks that I can't make out is a crown W, that means that barrel is choked. The amount of choke is not shown by the mark. It looks very nice to me, by the way.
    Mike
    Hey Mike,

    Thanks for the information. I had the gun restored by Kip Wood @ Central Michigan Gunsmithing. Over the years someone had changed the forearm to a beaver tail forearm. So Kip replaced it with a correct forearm, re-blued the barrel, refreshed the Case Hardening with bone charcoal and checked the action. His work speaks for itself.

    Johnnie

  8. #8
    Senior Member
    Join Date
    Dec 2011
    Location
    East Alabama
    Posts
    1,642
    Johnnie, The case coloring looks great. The polishing and bluing of the barrels is likely why I couldn't make out some of the marks. Maybe someone that knows more than I will finally chime in.
    Mike

  9. #9
    Junior Member
    Join Date
    Jan 2016
    Posts
    21
    Quote Originally Posted by mike ford View Post
    Johnnie, The case coloring looks great. The polishing and bluing of the barrels is likely why I couldn't make out some of the marks. Maybe someone that knows more than I will finally chime in.
    Mike
    Hey Mike,

    I will see if I can get better pictures. I can see the crown W that you spoke of. A friend of mine says that the 12/30 is 12/80 with the inside of the eight and zero were not flush to the barrel. Is there a way to know the year by the serial number? Let me know what you think.

    Regards,

    Johnnie

  10. #10
    Junior Member
    Join Date
    Jan 2016
    Posts
    21
    Quote Originally Posted by mike ford View Post
    Johnnie, The case coloring looks great. The polishing and bluing of the barrels is likely why I couldn't make out some of the marks. Maybe someone that knows more than I will finally chime in.
    Mike
    Hey Mike,

    I will see if I can get better pictures. I can see the crown W that you spoke of. A friend of mine says that the 12/30 is 12/80 with the inside of the eight and zero were not flush to the barrel. Is there a way to know the year by the serial number? Let me know what you think.

    Regards,

    Johnnie

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •