Results 1 to 4 of 4

Thread: Need a stock for my 9.3x62 Otto Bock.

  1. #1
    Junior Member
    Join Date
    Sep 2015
    Posts
    12

    Need a stock for my 9.3x62 Otto Bock.

    I found a really nice barreled action 9.3x62 otto bock that I really need a stock for.

    I was thinking of picking up a Oberndorf model B stock and trying to make that work, should that do the trick or should I go another route? Thank you.

  2. #2
    Senior Member
    Join Date
    Sep 2011
    Posts
    903
    This is a Mauser B stock:

    Finding a stray one will be near impossible.
    Otto Bock, Berlin, had his rifles put together by the Suhl guntrade, as did his competitor Foerster, Berlin. So a Bock stock was more likely like this one on a pre-WW1 Foerster 9.3x62:

    If I were in the USA, I would take a close look at the various styles offered by Walnut Grove Gunstocks, http://www.walnutgrovegunstocks.com/

  3. #3
    Member
    Join Date
    Dec 2015
    Location
    Central Alabama
    Posts
    55
    Beautiful rifles, Axel!

  4. #4
    Senior Member
    Join Date
    Dec 2011
    Location
    East Alabama
    Posts
    1,731
    Jager01,
    With out knowing exactly what you are trying to do and what you are willing to spend, I offer the following. Simpson Ltd. has imported a lot of 9.3x62s( also 9.3x57s), many based on Mod 98s, and most Huskeys. Many of these have been restocked to suite American tastes leaving a perfectly good stock left over. you might be able to find one of these stocks from a local gunsmith. I used one of these with a barrel that was given to me along with a WW2 military Sauer action to cobble together the 9.3x62 that I shot my buck with last year. You might have to adjust the inletting at the magazine( I just changed mine to a 1909 Argentine).
    Mike

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •